Concept / Function
A coil spring is a bar of special steel wrapped around an imaginary axis that operates according to the principle of elastic torsion.
Its function in suspension is to absorb the impacts caused by surface irregularities and to support the weight of the vehicle, thus ensuring comfort and height.
Types of coil springs
*Note: “RATE” is the Spring rigidity measurement. The higher the RATE, the more rigid (harder) the spring.
|Linear action springs|
|Have a single RATE over
their entire operating range
|Normally used at the
front end of the vehicle
open spiral ends
closed spiral ends
|Progressive action springs|
|Have two distinct RATES, the
shifting from one to the other
is carried out progressively
|Have variations throughout
|Are used at the
rear end of vehicles
Progressive Spring with a
cylindrical bar and variable pitch
Progressive Spring with a
conical bar and variable pitch
Progressive Spring with a conical
bar and variable pitch and Ø
|Suspensions based on the Macpherson concept receive side loads caused by attrition of the tire with the surface. These forces create friction in the shock absorber components resulting in discomfort and reducing durability.
With the objective of providing greater comfort and avoiding the friction effect on the shock absorbers, a new technology in Coil springs was developed. In addition to absorbing the impacts from surface irregularities and supporting the vehicle's weight, Coil springs with the SIDE LOAD concept absorb these same side forces.
Fabrini developed a technology called the L-SHAPE SPRING, where the specially shaped spring absorbs these side forces as well.
|Coil brake springs|
|We produce a broad line of coil springs for brake drums, with special raw materials and epoxy paint that provides great corrosion resistance.
|Coil springs for automobiles / pickups|
|Fabrini has the most complete product mix for domestic and imported vehicles with international quality standards.
|Special coil springs for vehicles driven by natural gas (GNV)|
|Seeking to provide our customers with absolute satisfaction and a package of solutions that attends to market needs, Fabrini developed a broad line of springs for vehicles driven by natural gas using the technology and know-how of the largest spring manufacturer in Brazil.
|Coil springs for motorcycles|
|These are hot-rolled with Linear or Progressive characteristics and personalized painting.
Concept / Function
It is made of one or more overlapping plates of steel that work as an elastic suspension element for vehicles.
Their function is to absorb the impacts caused by surface irregularities and to support the weight of the vehicle, guaranteeing comfort and height. In trucks, buses and pick-ups they also have the function of ensuring the connection of the axle to the chassis.
Types of leaf springs
*Note: "RATE” is the Spring rigidity measurement. The higher the RATE, the more rigid (harder) the spring will be.
|Linear action leaf springs|
|They are characterized by having a single RATE (constant / elastic) over the entire operating range. They are used on the axle where load variations are not expressive.
The term “Linear Action” is used because its operation is expressed in the form of a straight line.
|Progressive action leaf springs|
|They are characterized by a variable RATE (constant / elastic), a smooth (soft) start and a stronger (more resistant) end. The shifting from one RATE to another is carried out progressively as the applied load is increased.
They are used in the rear end of most vehicles where load (weight) variation is significant. This concept provides greater comfort to the empty vehicle and more resistance when it is loaded, affording greater drivability.
|Types of progressive leaf springs|
Support Leaf Springs
Shifting from one phase to another is carried out smoothly, according to the load being applied.
Linear action with the auxiliary leaf springs
Shifting from one phase to another is carried out at once, according to the load being applied.
Support and Auxiliary Leaf Springs
Used when there are large load variations.
|Leaf spring configuration|
Multiple trapezoid-shaped plates
Fabrini has equipment that permits the production of special suspension parts according to design and customer specifications.
Support for stabilizing bar
Stopper with support for stabilizer bar
These parts are produced with or without heat treatment, shot peening, and are painted or oiled.
All RNA springs, either byFabrini or NHK brands are tested, identified and packaged, going directly to the assembly lines of the main automakers in Brazil and overseas. Their quality is ratified, approved and certified by the strictest quality assurance systems, such as the ISO/TS 16949:2009.
The quality of Fabrini springs as Original Parts is also recognized in the spare part market, where they are known as “The original spring.” In order to aggregate more value to its products and its customers, Fabrini offers a service and solution package that ensures the correct maintenance and replacement of suspension springs through the training of independent repair professionals and professionals from cargo and passenger transportation companies.
Today, most vehicles in Brazil circulate with the comfort and safety of springs manufactured by RNA and marketed under the Fabrini and NHK brands, a guarantee of top performance and durability.
This is RNA, the largest manufacturer of original springs in South America.
Pioneerism took RNA to the leadership
The excellence achieved by RNA in the development and production of springs in Brazil is evidenced in the pioneering, innovation and leadership in supplying springs to the domestic automobile industry, encompassing passenger and light commercial vehicles equipped with coil springs and pickups, trucks and buses equipped with leaf springs.
RNA has an installed production capacity of approximately 5 million coil springs and 85 thousand tons of leaf springs per year, totaling more than 1000 constructive models, from the conventional leaf spring to the parabolic type and finally the new mixed suspension systems (air + metal), destined to the heavy vehicle segment. Coil springs with linear and progressive action, the latter with cylindrical, conical and biconical constructions are manufactured to supply to the light, average, motorcycle and braking system segments. This broad product line allows RNA to fully meet to the needs of the manufacturer, spare part and export markets.